Municipal & Irrigation Water Pump Services

CPM specializes in working with municipalities and utility companies as well as agriculture irrigation districts to deliver top-quality water pump installation and repair services across Northern California. We can install new pumps based on your specifications as well as repair and rebuild pumps that are no longer working as they should.

Contact us today to schedule an appointment so we can come and do a detailed analysis of the situation to determine how we can be a part of your project.

We'll Call You Back

Leave your information or call today at (530) 899-1583

Commercial Water Pump Installation and Repairs

Commercial Water Pump Installation and Repairs

Commercial water pumps are heavy-duty and built to perform at a high level of efficiency for long periods of time without fail. Over time the impellers and other moving parts of the pump can become worn and require repairs and replacements of pieces.

Commercial Pump & Mechanical, Inc. has a full suite of commercial water pump services that can handle any project large or small. If you have new pumps ready to go, we can install them. If you need pumps built to custom specifications, our fully equipped machine shop can build and assemble any style of the pump to fit your system.

Our in-house water pump testing facility allows us to tweak and optimize our pumps before they leave our warehouse so you can rely on highly efficient, long-lasting pumps to power water through your system for years to come.

  • Water Well Pumps
  • Vertical Deep Well Turbine Pumps
  • Submersible Well Pumps
  • Vertical and Horizontal Booster Pumps

General Contractor for Water Pump System Design and Build

Looking for someone to spearhead your new water system design and build? CPM can facilitate this project and guide you step by step through the decision-making process for setting up your water system in an efficient, long-lasting way.

As the General Contractor, we will put together the necessary plans and blueprints and assemble the team of subcontractors needed to complete the job.

  • Pump Building
  • Electrical Service
  • Valves and Piping
  • Water Storage Tanks

Water Well Pump Services

CPM does not drill water wells but we do inspect and service them. If you are experiencing issues with your well we can determine what the problem is and identify the best solution. The following is a list of water well services we provide:

  • Well Inspection
  • Pump Removal
  • Pump Repair or Replacement
  • Well Cleaning
  • Well Repair
  • Well Destruction
  • Electrical Service and Controls
  • In-house Efficiency
  • Testing and Vibrational Analysis
  • Certified Mobile Crane Operator

Is CPM a Good Fit for Your Municipal Water Project?

Please contact us today and let us know how best to contact you about your project.

Submersible Well Pumps

Submersible Well Pumps go down near the bottom of the well and push the water out. Since the motor is submerged in water, the electric motor is hermetically sealed and is protected from liquid exposure by the pump housing.

Vertical Deep Well Turbine Pumps

A Vertical Deep Well Turbine Pump has a motor that sits above a well and turns a turbine that is deep underground. Used commonly in irrigation and drinking water, a Vertical Deep Well Turbine Pump typically lasts much longer than a submersible pump.

When we come to inspect your deepwater well, we’ll use a video camera to take a look at what’s going on before we determine the proper course of action.

Booster Pumps

Vertical and Horizontal Booster Pumps

Booster pumps are used when pressure needs to be added to the system to move water where it needs to go. Booster pumps are normally used to boost water pressure in municipal systems, in water wells, irrigation systems, and rainwater collection systems.

While Horizontal Booster pumps were more common before, they are slowly being replaced by Vertical Booster Pumps for a few reasons:

  • They operate at a higher efficiency.
  • It’s easier to pull a pump out and replace it.
  • They have a smaller footprint and are less invasive.
  • The pumps last longer.

Since they are more common, it’s easier to get pumps, parts, and pieces.

CPM staff can help you find the right booster pump setup for your system or help you troubleshoot a system that isn’t running up to par.

Variable Frequency Drives

The old way of controlling the water pressure in a drinking water system involved placing a valve in the pump discharge and using the valve to control the flow and pressure of the water being pumped. As you can imagine, this was very inefficient as it operated at full capacity at all times.

Modern systems use what’s called a Variable Frequency Drive. In this kind of system, the flow of water is controlled by the drive and pump itself rather than a valve. It is much more efficient and saves energy.

Some utility companies even offer rebates for replacing the old valve system with an updated Variable Frequency Drive system.

CPM can help you navigate the rebate process and make sure you get credit for any system improvements you make in regards to this type of system.

Machine Fabrication Shop for Custom Pumps and Repairs

While most pump contractors have to rely on third-party machine shops to work on their pump, CPM has a special relationship with a top machine shop in the area that is fully capable of working on any pump system being used in municipal water today such as:

  • Vertical Deep Well Turbine Pumps
  • Submersible Well Pumps
  • Short Coupled Booster Pumps
  • Custom Built Sump Cans
  • Submersible Well Pumps
  • Axial and Mixed Flow Pumps
  • End Suction and Split Case Centrifugal
  • Gear Drives
  • Mechanical seals and custom-built seal plates for vertical pumps
  • Pump performance testing
  • Vibration analysis
  • Dynamic Balancing of Impellers and Propellers
  • Custom epoxy coating and powder coating

Electrical Supply & Controls

Every pump system needs a power supply and a control system. As part of the water system, it is necessary for us to be able to handle this part of the process. CPM has a close network of electrical contractors and electrical motor suppliers that we work with to make sure this part of the project runs smoothly every time.

Emergency Generators for Pump Houses

  • Diesel Generators
  • Auxiliary Engines and Gear Heads Installations and Repairs
  • deep-well-turbine-pump

    Efficiency Testing & Vibration Analysis

    We have an on-site testing facility for all of your pump testing needs. While other pump contractors have to rely on manufacturer testing, we have our own facility which allows us to shorten throughput time substantially, sometimes shortening project time by months.

    In-House Testing Facility Capabilities:

    • Underground tank
    • Variable Frequency Drive
    • Flowmeters
    • Pressure gauges
    • Torque drive meter
    • Comprehensive reports

    Contact Us and Request a Quote

    Give us a call or request a call back by filling out the contact form.

    What Can We Help You With?

    CPM Commercial Pump & Mechanical Inc. is ready to tackle your project with speed and professionalism. Fill out the form if you would like us to contact you at a later time to discuss how we can be a part of your water project. Thanks.

    Business Hours

    Monday – Thursday:
    6:30AM – 5:00PM

    Get in Touch

    We will be glad to assist you in finding the best water solutions for your unique needs!